Press
Releases
New
Products and Announcements
1983: A JACKPLATE FOR ALL BOATS
Engineers at Bob's Machine Shop have developed a product that all boaters can use. With a maximum engine rating of 40 hp, BMS's hydraulic kicker jackplate provides slow-speed power for cruisers, auxiliary power for sailboats and trolling power for fishermen.
Sailboat skippers will appreciate the jackplate's ability to reduce engine drag while under sail.
For economy, powerboaters can fire up their kicker for no-wake zones, slow cruising or when navigating shallow backwaters. And, the jack provides anglers with the option of using just one motor for trolling and main power.
(Click on photo for
hi-res image) |
The kicker jack is built with 6061 T-6 aircraft-grade aluminum to ensure high strength with minimal weight. All of Bob's Machine's hydraulic jackplate motors are mounted inside the boat for long life and easy maintenance.
An optional wireless control kit allows the skipper to operate the jackplate remotely with a small key fob from anywhere on the boat.
Retail price of Bob Machine Shop's patent pending, hydraulic kicker jackplate is $1,199. It comes with a limited lifetime warranty on the structure.
Contact Bob's Machine Shop at 4314 Raleigh St. Tampa, FL 33619. Phone: 813-247-7040; Fax: 813-247-7041; info@bobsmachine.com; www.bobsmachine.com.
boaters and fishing pros routinely use outboard engine
jackplates to maximize speed and performance. Now, jacks
have found a home among pleasure boaters as well. Bob's
Machine Shop offers its MJ5 Convertible Jackplate to improve
the performance of nearly any craft at a low cost.
(click here for full
press release)
(MS-Word) |
|
1944: FOUR-IN-ONE JACKPLATE ADAPTS TO ANY BOAT
Product
Sales Information |
|
1953: CUSTOM ENGINE COWLING
IS LIGHTWEIGHT AND EYE CATCHING
(Click on Photo for
300-dpi, hi-res Image) |
After
suffering dings, scratches, and exposure to the elements,
many outboard engine cowlings eventually need replacement.
Bob's Machine Shop, a Tampa-based high-performance marine
engine specialist, offers a lightweight, Mercury-type
aftermarket cowling that is both functional and distinctive.
(click here for full press release
(PDF)
(click here for full press release
(MS-Word) |
Product
Sales Information |
|
1955: EIGHT-INCH JACKPLATE NOW
AVAILABLE
 |
Previously, boat owners with 6" jackplates needed to add 2"
spacers to stay within the boatbuilder's specifications.
The new 8" unit, which can handle engines up to 300 hp,
eliminates the need for spacers, which can degrade
performance and place extra stress on the transom.
To provide additional strength with minimal weight, the 8"
jack uses 6061 T-6, aircraft-grade aluminum. All hydraulic
motors on Bob's jackplates are mounted inside the boat for
long life and easy maintenance. A remote option allows
control of the jack from the helm or other area of the boat.
(click here for full press release
(PDF)
(click here for full press release
(MS-Word)
(Product
Sales Information) |
|
|
1957:
NEW JACKPLATE HANDLES
300-HP ENGINES WITH EASE
(Product
Sales Information) |
|
1976:
WIRELESS CONTROL ADJUSTS JACKPLATES THE EASY WAY
|
(Click on Photo for
300-dpi, hi-res Image)
To optimize speed, performance and handling, jackplates are used on most flats, bay, bass and high performance boats. A new wireless remote from Bob's Machine Shop allows owners to adjust the jack's height easily with a key fob from anywhere—on or off the boat. The wireless control is ideal during docking or trailering when there is limited access to the jack's dash-mounted switch. It also allows anglers to raise the main engine remotely from the bow when trolling. |
Anglers with towers can conveniently operate their jackplates remotely from any position with the key fob.
The wireless control has three components: a waterproof key fob transmitter; a small receiver that mounts next to the jack's hydraulic pump; and the necessary cables for connecting the receiver to the jack's existing wiring harness.
The wireless control kit is compatible with all BMS jackplates and works independently from the boat's normal dash-mounted switch. It is available as a retrofit kit or as an option with new jacks.
The kit's suggested retail price is $169.99.
Contact Bob’s Machine Shop at 4314 Raleigh St. Tampa, FL 33619. Phone: 813-247-7040; Fax: 813-247-7041; info@bobsmachine.com; www.bobsmachine.com.
(click here for full press release
(MS-Word) |
(Product
Sales Inforation) |
| |
| |
