Proven Quality
The same superior design as our World Speed Record Holding Big Foot, low water pick-up cones.

High Water Flow Capacity
Allow surface Piercing props (choppers, cleaver style) to be run at maximum height for top speed and all out performance, while maintaining proper cooling to engine.

** Fits ONLY Bobs Machine's nose cones **

• 50% more cooling capacity
• Higher speed & proper water pressure
• Low water pick-up
• 50% more volume than any now on the market.
• Nose cone kit contains all hardware for complete installation
• Kit comes complete with ALMAG-35 top grade casting, epoxy, hose fittings and instructions.
• Crescent shaped for superior and handling
• Five inlets create less chance of stoppage than anything now on the market.

Shallow Water Access
Travel and fish waters, until now, were unable to be reaches with outboard motors having standard (side water pick-up) gear cases.

Nose Cone Shootout

Test Results and Fact Sheet

KITS

Nose Cone: Big Foot
BFNCK-DH Dual Hose

BIG FOOT Nose Cone Kit W/ Low Water Pick-Up -DUAL HOSE

Nose Cone: Big Foot
BFNCK-SH Single Hose

BIG FOOT Nose Cone Kit With Low Water Pick-Up -

Nose Cone: Bravo
BNC

Bravo Nose Cone - FACTORY INSTALLED (Kit included in cost)

Nose Cone: Bravo
BNC-K

Bravo Nose Cone Kit

Nose Cone: Bravo
BNC-LW

Bravo With Low Water - FACTORY INSTALLED (Kit included in cost)

Nose Cone: Bravo 89
BNC-bravo89

Bravo 89 (1989 and earlier)

Nose Cone: Bravo 90
BNC-bravo90

Bravo 90 (1990 and newer)

Nose Cone: Combo
BNC-Combo

Combo (same cone used in Sportsman)

Nose Cone: Grass Slipper
Grass Slipper

Tired of grass fouling your motor- Call for more information

Nose Cone: Installation
Labor - Please Call

Skeg Replacement

Nose Cone: Installation
Labor - Please Call

Nose Cone Installation : (Big Foot, Combo, Grassmaster, Sportsman)

Nose Cone: Shallow Runner
BNC-shallow

Shallow Runner (same cone used in Grass Master)

The customer can send unit completely assembled (any kind; Merc, Yamaha, Johnson, Evinrude, Mariner and Etc.) gears do not have to be removed, unless they prefer sending empty housing either way the units are U.P.S. shippable.

We need unit for 7 to 10 working days upon receipt of the lower unit

Upon arrival all gear cases are marked and dated with customer's ID# to assure proper identity.

We will then sand blast gearcase.

We will then center line nose cone to prop shaft, welding nose cone in place while being held in a fixture to assure proper alignment.

We then blend the nose cone into the unit using epoxy fillers and finish to the proper contour and shape using air files, D.A. Grinders and so forth.

Then we prepare the case to be painted with an etching primer and then a sealer primer and then to a finish paint.

Now we reassemble the unit putting stainless steel hoses on to complete job and ship in 7-10 business days, after receipt.

Warranty* - 2 years Against Blistering and Bubbling